BMPLC - FIBERGLASS RESIN, A498

Product Identification

Product ID:FIBERGLASS RESIN, A498
MSDS Date:01/29/1991
FSC:8040
NIIN:00N025332
MSDS Number: BMPLC

Responsible Party
FIBRE GLASS-EVERCOAT CO INC
6600 CORNELL RD
CINCINNATI, OH 45242
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-729-7600

Preparer: JEFF ZYCH

Cage: 18731

Contractor
FIBRE GLASS-EVERCOAT CO INC
CINCINNATI, OH 45242 US

Telephone: 513-489-7600

Cage: 18731

Ingredients

295F.

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


POLYESTER RESIN

Fraction By Weight: 60%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPORS MAY CAUSE NOSE, THROAT &
RESPIRATORY TRACT IRRITATION. HIGH CONCENTRATIONS MAY CAUSE
HEADACHE & NAUSEA. REPEATED HIGH CONCENTRATION EXPOSURE MAY CAUSE
LIVER & KIDNEY DAMAGE. SKIN:PROLONGE D OR FREQUENT CONTACT MAY
CAUSE DEFATTING, DRYNESS W/ IRRITATION & POSSIBLE DERMATITIS.
EYE:MAY CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:CLASS 2B (IARC).
Effects of Overexposure:HLTH HAZ:TEARING AND IRRITATION. INGEST:MAY
CAUSE GASTROINTESTINAL DISTURBANCES, PAIN AND DISCOMFORT.
ACUTE/CHRONIC: INHALATION OF REPEATED HIGH CONCENTRATIONS MAY CAUSE
LIVER AND KIDNEY DAMAGE.
Medical Cond Aggravated by Exposure:LIVER AND KIDNEY DISORDERS.

First Aid

First Aid:SKIN:WASH WITH SOAP & WATER. EYE:FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND GET MD. INHAL:REMOVE FROM EXPOSURE. IF
UNCONSCIOUS GIVE ARTIFICIAL RESPIRATION OR OXYGEN AS NEEDED. GET
MD. INGEST:DO NOT INDUCE VOMITING (ASPIRATION HAZARD). GET MD.

Fire Fighting

Flash Point Method:CC
Flash Point:98.0F,36.7C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POLYMERIZATION MAY TAKE PLACE AT ELEVATED
TEMPERATURE IN FIRE. IF CONTAINED, VIOLENT RUPTURE MAY RESULT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL WITH
ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT THE INHALATION OF VAPORS OR SPRAY MISTS
WHEN THE TLV OR PEL IS EXCEEDED. WEAR NIOSH/MSHA APPROVED DUST MASK
WHEN SANDING THE CURED PRODUCT.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL EXHAUST
VENTILATION) TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG/FULL LENGTH FSHLD .
Other Protective Equipment:USE A BARRIER CREAM SUCH AS GLOVE COAT WHEN
USING THIS PRODUCT.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING. WASH
HANDS BEFORE EATING AND DO NOT SMOKE WHILE USING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:SEE ING 1
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:10 LB/GAL
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:LIQUID, SHARP AROMATIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE
IRRITATING ACRID FUMES.
Conditions to Avoid Polymerization:IF HAZARDOUS POLYMERIZATION OCCURS
WHILE CONTAINED IN A CLOSED CONTAINER, VIOLENT RUPTURE MAY RESULT.

Disposal

Waste Disposal Methods:SMALL QUANTITIES CAN BE REACTED WITH THE
APPROPRIATE HARDNER TO SOLIDIFY. DISPOSE OF IN ACCORDANCE WITH ALL
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.